Harvey Tool
Facebook Instagram LinkedIn Twitter YouTube

4 Flute, Corner Radius - Rougher, Chipbreaker

End Mills for Steels, High-Temp Alloys, & Titanium

Photo is an illustration of an exemplary tool

HSVR-C-4 | Carbide End Mills

The HSVR-C-4’s offset chip breaker geometry keeps chips small to increase chip evacuation and minimize cutting forces. With its unique, redesigned end cutting geometry, this tool is also capable of ramping, slotting, and plunging into parts.

  • Eccentric relief for maximum edge strength
  • Offset chip breaker geometry creates smaller chips for optimal evacuation and a semi-finished surface
  • Redesigned end geometry for optimal ramping, slotting, and plunging
  • Center cutting
  • h6 shank tolerance for high precision tool holders
  • Aplus coated for added lubricity, higher speeds and feeds, and increased wear resistance
Jump to Product Reviews

Below are downloadable Simulation Files in DXF format (half-round line drawings) to accompany Harvey Tool products. Each file is specifically scaled to the geometry of the tool to help simulate running parameters and create tool paths. Like our speeds & feeds charts, these files will be continuously updated with the introduction of new products and new catalogs to assist operating the majority of our tools. Simulation files can also be accessed by searching for a specific tool number on the left-hand side of the website and then clicking on the Simulation table in the product table.
Please don’t hesitate to contact our tech team with any questions at 800-645-5609 or tech@harveytool.com.

To navigate between folders or download a file, DOUBLE CLICK on the folder or file.

Cutter Diameter* Shank Diameter Corner Radius Length of Cut Overall Length Flutes Aplus Coated Aplus Coated
+ Weldon Flat
Tool Description
D1 +.000" / -.002" D2 (h6) R +.002" / -.002" L2 +.032" / -.000" L1 +.062" / -.062" Tool # Price Tool # Price
1/8 1/8 .010 1/4 1-1/2 4 33017 18.10 HSVR-C-S-40125-R.010
1/8 .010 1/2 2-1/2 4 33032 21.60 HSVR-C-R-40125-R.010
3/16 3/16 .010 5/16 2 4 33077 21.70 HSVR-C-S-40187-R.010
3/16 .010 5/8 2-1/2 4 33092 28.30 HSVR-C-R-40187-R.010
1/4 1/4 .020 3/8 2 4 33137 26.50 HSVR-C-S-40250-R.020
1/4 .020 1/2 2-1/2 4 33142 30.90 HSVR-C-SR-40250-R.020
1/4 .020 3/4 2-1/2 4 33152 35.10 33152W 41.10 HSVR-C-R-40250-R.020
1/4 .020 1 3 4 33167 52.10 HSVR-C-M-40250-R.020
5/16 5/16 .020 1/2 2 4 33227 31.40 HSVR-C-S-40312-R.020
5/16 .020 3/4 2-1/2 4 33242 41.40 HSVR-C-R-40312-R.020
5/16 .020 1-1/4 3 4 33257 65.50 HSVR-C-M-40312-R.020
3/8 3/8 .020 1/2 2 4 33317 43.80 33317W 49.80 HSVR-C-S-40375-R.020
3/8 .020 7/8 3 4 33332 50.20 HSVR-C-SR-40375-R.020
3/8 .020 1 3 4 33337 52.10 33337W 58.10 HSVR-C-R-40375-R.020
3/8 .020 1-1/4 3 4 33347 71.10 HSVR-C-M-40375-R.020
7/16 7/16 .020 5/8 2-3/4 4 33407 60.40 HSVR-C-S-40437-R.020
7/16 .020 7/8 2-3/4 4 33422 68.10 HSVR-C-R-40437-R.020
1/2 1/2 .030 5/8 2-1/2 4 33497 67.40 33497W 74.40 HSVR-C-S-40500-R.030
1/2 .030 1 3 4 33512 73.80 33512W 80.80 HSVR-C-SR-40500-R.030
1/2 .030 1-1/4 3 4 33527 78.40 33527W 85.40 HSVR-C-R-40500-R.030
1/2 .030 1-5/8 4 4 33542 99.60 33542W 106.60 HSVR-C-M-40500-R.030
5/8 5/8 .030 3/4 3 4 33557 120.10 HSVR-C-S-40625-R.030
5/8 .030 1-1/4 3-1/2 4 33572 130.80 HSVR-C-SR-40625-R.030
5/8 .030 1-5/8 3-1/2 4 33587 143.80 33587W 152.80 HSVR-C-R-40625-R.030
5/8 .030 2 4 4 33602 155.60 HSVR-C-M-40625-R.030
5/8 .030 3-1/4 6 4 33617 198.60 HSVR-C-L-40625-R.030
3/4 3/4 .030 7/8 3 4 33632 175.10 33632W 186.10 HSVR-C-S-40750-R.030
3/4 .030 1-1/4 4 4 33647 185.60 33647W 196.60 HSVR-C-SR-40750-R.030
3/4 .030 1-5/8 4 4 33662 195.80 33662W 206.80 HSVR-C-R-40750-R.030
3/4 .030 2-1/4 5 4 33677 211.60 33677W 222.60 HSVR-C-M-40750-R.030
3/4 .030 3-1/4 6 4 33692 263.70 33692W 274.70 HSVR-C-L-40750-R.030
1 1 .030 1-1/2 4 4 33707 297.50 HSVR-C-S-41000-R.030
1 .030 2 4-1/2 4 33722 338.30 HSVR-C-R-41000-R.030
1 .030 2-5/8 5 4 33737 356.10 33737W 370.10 HSVR-C-M-41000-R.030
1 .030 3 6 4 33742 449.10 33742W 463.10 HSVR-C-ML-41000-R.030
1 .030 4-1/4 7 4 33752 546.40 HSVR-C-L-41000-R.030
*.0005 max TIR

Speeds & Feeds

Get customized Running Parameters for your Helical Solutions End Mills!

Machining Advisor Pro is a cutting edge resource for generating customized running parameters specifically for Helical Solutions end mills. Designed by the experts behind Helical Solutions tooling, Machining Advisor Pro calculates optimal running parameters based on material type, end mill features, machine set-up, tool path and other factors to help users get the most out of Helical end mills. Click the image below to get started now!

 

Download Standard Speeds & Feeds

If you'd prefer to download a standard set of Speeds & Feeds for this product line, please click the link below. All posted Speed & Feed parameters are suggested starting values that may be increased given optimal setup conditions. If you can't find the information you're looking for, Helical has a team of technical experts available to assist you. Please contact us at 866-543-5422 or helicaltech@harveyperformance.com.


4 Flute - Chipbreaker

Need To Place An Order? Find A Local Distributor

Machinists' Feedback

Used this tool? Share your experiences.

Create your own review

E-mail A Friend

Privacy Policy. All rights reserved. All Content Herein © 2018 Helical Solutions